TECHNICAL SPECIFICATIONS

Power source: 3 x standard AA alkaline batteries

Battery life: 18 months of normal operation

Applicable technologies: Temic, Mifare 1, numeric code

Material: Stainless steel

Media format: Plastic card, pendant, wristband

Surface treatment: Brushed stainless steel, brushed brass

Dimensions (H x W x D): 114 x 45 x 13.5 mm

Operating humidity: 20%-80%

Working temperature: -10°C to 60°C

PROPERTIES

: They do not require the preparation of cabling

: They work in offline mode

: Waterproof and work at low and high temperatures

: The installation itself is very simple

: Unique control algorithm, no possibility of copying

: Offers a high level of security

: 3 standard AA alkaline batteries

: Motor-operated locking mechanism designed for a minimum of 500,000 cycles

: Light and sound signaling

: Audit record of the passage history of up to 1000 events

: Automatic signaling of low battery voltage

: Alarm with Anti-pick function

: Can optionally be delivered with mechanical locking of the needle

: The possibility of using an external power supply unit

OPTIONS OF OPERATING MODES:

Mode 1 – Fixed Chips

The locks work without operating software. Each lock has hard-assigned authorized chips/codes.

Functional Chips: Mother; user. After installation, each lock is assigned a Mother chip – usually one for the entire operation (card, pendant, bracelet, etc.).

Mode 2 – free choice

The locks work optionally with the use of operating software or completely without software. Each lock has a fixed Mother chip and up to 15 Master chips. The user chip does not need to be defined in any way and the user can use any unoccupied cabinet. The locks can be numbered using the software, which subsequently enables the number of the occupied locker to be read from the user chips. Free selection mode is also available for coded locks.

Functional Chips: Mother; Masters; User. After installation, each lock is assigned a Mother chip – usually one for the entire operation, followed by Master chips. With the mother chip, you can open the box, assign and delete authorized Master chips. Master chips are used to open the cabinet and at the same time cancel the authorization of the user chip. After assigning Master chips, the locks can be normally used by user chips.

Mode 3 – access system

ACS-HU CABINET electronic cabinet locks can be integrated into the access system. With the use of control software, wardrobe locks behave in the same way as, for example, hotel card locks. In other words, they verify the validity and legitimacy of the chip over time and keep a history of use that can be blamed afterwards.

Note: The locks can also be set to the so-called surveillance mode. The locker can then only be opened with the assistance of an authorized supervisor.

The electronic cabinet lock system is also compatible with other related electronic security products offered by our company ACS Solution s.r.o., such as electronic locks with chips, access systems, energy savers and safes.

With a single chip, you can control everything from the front door to the lighting in individual rooms, all with backup control and one control software.

PRODUCT CATALOG ACS HU CABINET.pdf

ACS HU CABINET – PRODUCT LIST EN.pdf